The answer is toolbox or similar container systems. It runs a sandboxed version of another OS inside your Bazzite install with minimal performance overhead. Not quite the same thing as virtualization, but thinking in those terms can be helpful for those new to the concept. It won’t let you run and install everything, but it sure will handle a lot!

Self hosting Mealie could be a great option to take things into your own hands.

On the flip side: if a car stereo has a known firmware issue causing problems with say Bluetooth connection, I DO want the manufacturer to actually provide an easy means of fixing/updating the borked software. Better that the system was properly tested and feature complete to begin with- but I’m not delusional enough to believe we can truly have nice things.

Possibly dumb question: why not use an Authentik outpost with a reverse proxy to enforce SSO? It wouldn’t be “baked in” so to speak, but it would be fully OIDC and as long as you’re just running it through a web browser. Biggest downside is you’d need 2 logins (one for the outpost and one for the app). I’d assume the sso is specifically for the extra security though, so that shouldn’t be a problem outside of it being a little hassle.

Oh baby, time to proselytize the masses of Lemmy and introduce a whole new set of suckers to “Fido”. It’s zombies with big Fallout vibes and is unironically one of the best C to B tier movies I’ve ever seen. It’s the kind of movie where it looks like everyone involved was just having fun with it, ya know? Check it out and make sure to let me know what you think!

Adding repos can just be done inside a Toolbox, or even as Overlays. Grub can also be edited and changes applied to immutable OS’s like Bazzite/Kinoite. I’d definitely say give it a shot on a non-daily driver machine and see how you like it. Having the option to mess with the underpinnings can be nice- but not having to has a lot of value as well.

I know, right? It’s so hard to “really” mess something up and Toolboxes are very cool for things not served by Flatpaks or Overlays.

Regarding your not wanting to go with an immutable distro: what configs are you thinking you’ll need to mess with that makes an immutable distro a bad idea exactly? I was previously on the fence about it as well but Bazzite has absolutely served my needs and requires way less fiddling than my previous Nobara install did after major updates. I have yet to find any day to day configurations that I haven’t been able to overcome with OSTree overlaying. Aside from being immutable, Bazzite literally checks every other box you’ve got listed.

Same boat as you. The HOA maintains a pathway in a wetlands reserve right behind the residential area and it costs less than $20/mo.

They don’t really care what you do besides the following: no farm animals/chickens, no structural changes to the homes without a licensed contractor performing the construction, shoot an email to the HOA if you’re going to replace your roof or repaint your house to keep SOME level of uniformity.

Mostly they don’t care. Hell, the CC&R’s and HOA incorporation docs literally say they won’t directly enforce things against you and leave it up to the neighbors to take you to court with the HOA docs/agreements as free ammo. So if you explicitly want to be a menace to your neighbors/piss people off or want to have the only bright ass neon pink home with custom additions in the entire neighborhood - probably not the place for you. Otherwise they’ve had no effect on myself or my neighbors whatsoever and the wetlands/park is really nice.

Isn’t AMD’s HEVC/265 still decent, specifically? I feel like I read that somewhere years back. 264 has always been a weak spot for them, however.

Atomic OS’s (especially Fedora based) with Nvidia are going to be a bit of a pain. Did you follow all the instructions found Here ? I personally gave up on silverblue/kinoite after I tried Bazzite. Similar bases, but the Bazzite devs paid special attention to GPU and accessory drivers/implementations that are otherwise much more painful in Fedora Atomics. You can always do a clean rebase then re-run the steps above (only the OSTree section).

Software-wise, it seems that the relatively fast adoption of flatpaks and other containerized formats somewhat solves the typical dependency hell that was so common in Linux just a few years back (and to some extent still is an issue today depending on your distro and use case). The hardware support side is a little harder. That’s going to be up to vendors to play nice with the Kernel team and/or introduce reasonable userland software that doesn’t break the golden rule. Until Linux gets more market share the latter isn’t likely to happen. A nice side benefit of the emergence of immutable and/or atomic distros is that users can play around and try things with much lower risk of bricking their systems, so I’d also consider that a step closer in the “it just works” department.

Xbox controllers (Xbox One and newer) have been absolutely solid for me with the xone driver + xpadneo, regardless of distro. Bazzite has everything I need baked in, so it was completely plug and play. Not a very interesting answer, I know. But it still blows me away that it “just works.”

Very true. But brute force checking through tons of different settings for each camera you need to configure is not fun. I couldn’t seem to find any kind of “known working configs” database or anything either. Every camera seems to be different in what it expects, outputs, authenticates, etc. Once it’s set up, I agree, maintaining the config is easier. Having all your cameras match in model and firmware version probably makes the whole endeavor MUCH easier.

AmCrest and Frigate together are SO good. Integrating Frigate with Home Assistant was also insanely easy for quick viewing and notifications. That initial Frigate config is a bit of a bear- but once you’re past that I cannot speak more highly of it.

hunter2

Alright, where’s my replacement once my current Fitbit dies? What company makes a watch that tracks steps, heart rate, sleep, spO2, notifications, is generally water resistant (light swimming) and has a battery that lasts ~5+ days? Bonus points for open firmware/hardware that doesn’t require me to design my own apps/systems for each of those items. I don’t even use most of what my Versa 3 can do, but I know it won’t last forever and I’d at least like an idea of where to go if/when it breaks down.

Proton experimental and (at least as of yesterday) I had to opt into bleeding edge beta as well or I’d just get black screen at launch.

No stuttering for me on Linux… Runs as good as it ever has but the visuals are even that much better due to the engine upgrades. Not a fan of the new UI, but the old UI was clunky too, so I can’t really say it’s even a step backwards.

On windows the article mentioned being a microcode patch via Windows update. Linux would be similar- but via a kernel update most likely. I’d assume that a general BIOS update would also do the trick, but then you’re relying on motherboard vendors and it’s unlikely many would provide such an update to older hardware, even if it’s still widely used.