It’s Linux designed around modern containerization and microservice technologies. The “cloud” naming is a bit of a misnomer, but the same abstracted technologies that help run a modern data center will help make sure your handheld’s launcher doesn’t break because a game or comparability layer wants to use a different database version. https://github.com/cncf/toc/blob/main/DEFINITION.md

This is pretty typical for universities. They don’t want the airwaves clogged, doubling up NAT can lead to networking wonkiness, and they don’t want you giving university network access to unauthorized folks with an open AP.

When you say VR streaming, you just mean wireless from your PC to the headset, right? There’s a chance you could do that with an offline wireless router if the VR experiences you’re looking to play are single player.

For a bit more context, this is the fan project “Bloodborn Kart” with its IP serial numbers filed off.

NuPhy’s got some interesting options as well. https://nuphy.com/collections/keyboards/products/halo75-v2-qmk-via-wireless-custom-mechanical-keyboard

The low profile space is a little tricky. It leans into column staggered ergonomic boards really quickly. Kailh’s Choc switch is as low as you can go, but those folks get really custom really quick. They’re not big on function rows or arrow clusters, so the next step after Keychron or NuPhy would be something along the lines of the Afternoon Breeze. https://www.afternoonlabs.com/breeze/

Have you taken a look at any of Keychron’s offerings? https://www.keychron.com/products/keychron-k3-max-qmk-via-wireless-custom-mechanical-keyboard Checks most of the boxes other than the knob.

Just got my Ambient Twilight silent choc switches in! These switches feel incredible. I’d been running tape/floss modded Red Pros up until now. Their sound is similar depending on how well you did the mod, but they always felt disappointingly mushy. The Twilights are even quieter and have a nice satisfying linear feel. They’re definitely quiet enough to start bringing to the office more regularly.

The keyboard’s a variant to last year’s TypeBoy. A pair of modded Game Boy Advance cartridges house a custom PCB, XAIO BLE, shift register, and Sharp Memory Display. (When you don’t accidentally crack one during installation. Whoops.) The Mark II trades the staggered column setup for an ortholinear layout with an offset mod row. The new shape helps channel the handheld vibes a bit better. I went with a PCB stack this time for the case. Partially to try something new, partially to hide the bright Pro Red switches. I’ll have to let the Twilights shine a bit more on the next revision.

The two hardest problems in computer science are cache invalidation, naming things, and off by one errors.

My favorite compile error happened while I was taking a Haskell class.

ghc: panic! (the ‘impossible’ happened)

The issue is plainly stated, and it provides clear next steps to the developer.

Looks great! Love those wooden rests!

There’s a whole linage of arcade game button design, but you occasionally see keyboard switches show up in custom fighting game sticks.

Mice and trackballs often borrow from the whole universe of buttons to make their sculpted formfactors work. I feel like I’ve seen one or two with mechanical keyboard switches in them.

Like rockSlayer mentioned, they just bridge a physical connection between two pins and can technically be used anywhere a typical button could be. Keyboard switches are so optimized for their large square footprint and particular travel distance that they’re usually not the best fit for random industrial needs. You could make an elevator control panel out of key switches, but there’s probably a cheaper, more well suited button you could use instead.

https://www.serverbuilds.net/ is a popular website online for folks building NASes at home. They’re fans of Unraid as well. They’ve got a Discord if you’re looking for something more interactive. Worth checking out. 👍

There’s tons of super enthusiast keyboards out there. (See: All of the other comments here.) If you’re just curious what’s out there beyond Logitech and Razor, pretty much anything Keychron makes will be exceedingly pleasant without breaking the bank or going off the deep end.

Looks nice. A good expensive low-pro for folks who want to go all in without much tinkering or soldering. The thumbs and mods are a little baffling though. If you’re going to include a number row, why not go full maximalist and add a few extra modifiers and make it a traditional 56/58 key layout like the Lily or Sofle? It might look different hands on, but that thumb also seems really far out.

Did you design a schematic or define nets using something like Ergogen? Schematics/Nets provide you with those little white lines defining, “These two pins should connect on the same circuit.” After you’ve traces all the routes to connect your components together, DRC will tell you if you missed a connection, or if two things are connected that shouldn’t be. It’ll also give you warnings like traces being too close to the edge of the board.

Thanks! It’s Inland’s Purple PLA. https://a.co/d/8ImXXVE Ironically I had a spool of it from a year or two ago. It just happened to match the keycaps well.

There’s nothing quite like seeing a nicely spaced out PCB in KiCAD, only to have the real thing show up in the mail and show you just how close 0.5mm pins with a 0.5mm pitch really are. I’m really happy with how it all came together in the end though!

This keyboard looks great! I love the keycaps you went with here. There’s always something you can tweak next time, but this looks like a really nice first board!

The RP2040 Zero has 20 pins on it and can fit some pretty large matrixes. It looks like they used a pair of shift registers on the XIAO build to get some extra column pins.

When you say without the ergo split thing, are you looking for something that’s “row staggered” like Keeb.io’s new Cepstrum? https://keeb.io/collections/cepstrum/products/cepstrum-keyboard-pre-built It’s a more traditional 65% build, but still split.

Or are you just looking for something Corne-like and ergo, but as a unibody build? The Reviung41 LP rings some bells. https://mkultra.click/reviung41-lp-low-profile-keyboard-kit/

It helps if you can find a half-dozen people involved in something you like to follow at the start. Other than that, try joining a mid-sized (~1,000-3,000 users) Mastodon server based around a hobby, interest, or social group you’re a part of. Most Mastodon clients allow you to keep a column open for the people you follow as well as the people on the “Local Timeline” who are a part of your server.

It’s a new social network. If you see someone pop up who’s made a pithy post or two, give 'em a follow. If they’re not working out a week later, un-follow them. Don’t feel afraid to follow a ton of people when you first get started to liven up your feed until you find a good circle of folks.