“Why do people do X, when in my opinion if you disregard the two top reasons for doing X, it’s pointless? Prove to me that it would be better!?”

Change your thought patterns. Minimise their actions in your mind.

They are not “psychopaths”, they are just “idiots”.

They do not “counterattack”, there is no “attack” from your side. They are just “being a nuisance”. Frame all the bumps and thumps as renovations if you want.

When they make a noise, turn UP your tv, just a little, so you can hear it over it. “Gee those renovations of theirs are a bit noisy, maybe I should put in a complaint.”

When they rattle the ceiling of their apartment, “Hey it must be time to vacuum, thanks for reminding me. I’ll do it now while you’re renovating and making noise so it doesn’t disturb you too much”.

“I hear that plants respond to music so I’m just going to leave some on for Ferris, my pot plant, while I go out shopping for a few hours this morning” - Not too loud, just loud enough for Ferris to enjoy it. If you hear a lot of thumping it must be just them taking the opportunity to renovate while you can’t hear them. I do hope they don’t damage their ceiling with all that thumping while you’re out, oh well.

All that activity on their part takes a lot of energy, your activities take very little. Which one do you think is going to end first?

You’ve got it all wrong, in traditional computer terminology the “hard drive” is the box that sits under the desk that collects cat fluff and cigarette tar.

/s …?

Lots of expensive industrial equipment runs these kinds of processors still. You can still buy motherboards with 8 bit ISA slots even, although you’ll pay quite a premium.

But all of that kind of gear typically runs its own distro with an in-house build system. For example, my work uses a flavour of Buildroot for their embedded Linux systems and you can just set whatever processor type you like all the way back to plain old i386 when you build it.

Bastard user from hell

Every IT/software group needs to have one, otherwise you get complacent.

If you occasionally boot to windows, it’s known to leave NICs in an unusable state if you just hibernate/quick power off. You need to boot back to windows and so a “proper” shutdown for it to come good.

Consider yourself corrected then. I’ve skimmed your comment history. Your go-to insult is “bootlicker” or alternatively, a simple clown emoji. In your comments you seem to provide very little context as to why you think that, it’s just, “I deem you to be a BOOTLICKER! Next!”

So maybe a little guidance for you:

The very, very, first thing you do when dealing with perceived propaganda - be it on mainstream media, online, or wherever - is to remove all the emotion and insults and see what’s left. You know what I see when I parse your comments like that? Very little.

Thus I conclude you have nothing of importance to say, and you become background noise that gets tuned out.

Actually your comments do have some small value. I check your bootlicker-comment-score and if it’s greater than 5, I know the community you posted in isn’t worth my time.

“Akshually”, so do you. You had a chance to discuss and inform, and instead you went straight to “bootlicker”.

Do you think they’re going to take any notice of whatever you say from here on?

Samsung front loader washing machine here.

It is generally musical while selecting program options. It sings a little song when finished, which is only after it unlocks the door. The little song only plays once. The little song can be changed to other tunes by subtle and undocumented button presses.

After about 10 minutes it plays a few notes while turning itself off that are easily recognisable as the notes it plays when it turns itself off, so if you miss the first little song, once you hear that you know it’s definitely finished. After that it is done. No more door locking shenanigans or tumbling or clothes.

Generally I use the “sportswear” cycle which is about 1 hour, my clothes are generally not that dirty. Sometimes I treat towels / linen to a hot cotton cycle which is 2.5 hours and a 90 degree (Celsius) wash.

Had it for 10 years now, no mechanical or electrical issues. I always leave the door ajar when finished and once every few months I do a cleaning cycle.

I also have a Fisher and Paykel dryer. I have owned it for 8 years, in which time it has needed a replacement drive belt as it gets used heavily. The bushes on the drum need replacing soon, but I just turned it upside down so it will last for a while longer

Regarding your door issues, well that’s because idiots try and open the door during a load, and then when it’s locked, they turn it off and still try and open the door. They subsequently complain about the water going everywhere. Don’t forget that manufacturers have to deal with the lowest common denominator end user.

You don’t need an entire web server in your daemon, you just need the socket.

Include a websocket listener in the daemon. Keep a ringbuffer of the last X data points, whatever nicely fills your client graph, for example. Wait for clients to connect, dump in the ringbuffer, then update clients as data comes in.

The webserver can serve up the page with the client code that links to the websocket. After that it’s strictly a discussion between the end client and the daemon over websockets.

consider what happens if the actual data contains them.

Then you’d escape them by using another character in front. But if their data format is ASCII text or is guaranteed not to have characters below ASCII 32 then using ASCII delimiters is fine.

…use Windows on an air-gapped PC to do all your software development? At least then hackers won’t steal your source and post your shameful code on the internet.

Ollama released a new feature yesterday

Ollama 0.5.1, yesterday : “Fixed issue where Ollama’s API would generate JSON output when specifying “format”: null”

Ollama-rs 0.2.1: released 08/09/24.

Gee I wonder why it doesn’t play nicely with the latest Ollama API which uses new/updated behaviour for an option 🤔

“Just got to spin through a few trillion instructions to get things sorted before we go to standby! Won’t be a minute!”

What the incoming president fails to understand is that the money that the US funnels towards NATO helps keep a lid on conflicts “over there”, so they don’t end up “over here”, like WWII.

The US reached the “bread and circuses” stage of politics a decade or so ago. Once the population figures out it can vote itself money (or the promise of money) it’s all over.

Look at the campaign promises of the incoming president. “More for you, not them”, sums it up. The problem is that everyone hopes they are the “you” in that offer.

Mainly the issues are about providing ~600 kilowatts for 8 minutes to charge your typical size EV battery.

A row of 5 chargers of that size soaks up 3MW if they’re all in use, and that’s not something that can be quickly or easily shoehorned into a suburban electricity grid.

It’s about 500 houses worth of electricity usage, for comparison. For just 5 fast chargers.

Not to say it’s impossible, but infrastructure doesn’t come cheap, and so it’ll cost quite a bit to cram that 80 percent charge into your car’s battery.

You are flashing the chip directly so apart from inadvertent short circuits and such if it doesn’t work you can just keep trying until it does.

As for wire length it all depends on how fast they clock the SPI bus when flashing. You’ll probably be able to get away with 20cm or so without difficulty , I’ve driven SPI displays with that kind of wire length before.

Well this seems to go against all sorts of disaster recovery practices, so I’m torn between believing either they are truly incompetent or they are just lying.

Something like a raspberry pi or equivalent, and use reverse SSH set up to connect to a server with a known address on your end.

This means that ports don’t need to be opened on their end.

Also if you go with a gateway host, shift SSH to a randomised port like 37465, and install fail2ban.