Works great in some situations (I run two dev environments and a couple of test machines as VMs), but not always. I need a physical Mac to do iOS development / builds, so need a USB switch to switch my keyboard and mouse to it when working.
Do you really need video?
My monitors have multiple inputs, so I just use a USB switch for my mouse and keyboard, and then switch the monitors between devices as needed.
Plate and stabs are stock (so screw in stabs, and PC plate).
The stabs are the least rattly that I’ve had so far (although my daily driver for the last few years no stabs, as it didn’t have any keys over 2U).
I’ve had acrylic, and stainless plates on my prior custom builds, and my Ergodox has aluminum plates, and I’m quite happy with the poly carbonate. At some point (when they come back in stock) I’ll probably get an aluminum plate just to check it out, and will grab the Pro => Max sound kit as well.
I’m using the K Pro Banana switches. I’ve run Gateron Browns primarily, but I my Erogodox has the V2 Zealios, and another build has R6 Zealios. The Zealios were a bit heavy for me for all day typing, but I like the banana switches.
I’m using the stock caps for now as well. I’m not entirely sure I love them, but I figured I’d give them some time before switching to a GMK or DSA set.
I have the Q5 Pro, and it’s definitely thocky (and a beast of a slab of aluminum after having a few layered acrylic cases).
The Max is probably a bit less thocky with the extra foam (it has 3 more foam layers than the Pro).
I haven’t used the Shift V2, but for me the extra column of keys and the full ten key, was more important than the aesthetics and adjust-ability of the Shift case.
@
uBlock Origin on Firefox certainly works. There was a short period of about 5 days (a couple of months ago) where they were blocking playback with uBlock enabled, but it didn’t last long.
No QMK specific community that I’m aware of either, but in addition to this one there’s also mechanicalkeyboards@lemmy.ml but it’s pretty quiet over there.
I don’t have much advice on finding the caps, or what will fit on it, but the profile that Keychron sells on their low profile boards is LSA (and appears to be their own profile). Using the profile name should give you a bit better search results, but it looks like there isn’t much out there that will fit those low profile switches.
If you are handy with basic soldering and some programming, you could easily wire these to a controller, and program them to a key. That’s what I did with the ones I had.
Are you looking for a bare pedal that you can wire to a controller, or something that’s ready to plug in?
For something that’s ready to be wired to a controller, I used a couple of these: https://www.amazon.com/Momentary-Operated-Controller-Industrial-Anti-Skid/dp/B07KN6GLYD
They’re a single firm clicky button, with relatively short travel. I never really had any issue with them being pressed too easily.
My mom buys these cheap LED bulbs from Amazon and about half burn out quickly (probably 10% are DOA).
We have 100% LEDs throughout our fifth wheel (about 30 of them), and they are all still going strong (all installed in 2015, and used daily since then).
I think there’s a serious difference in quality available and it certainly shows.
In 2008(ish) we rewired our house (built in the '20s) and replaced every fixture. We probably had 25 CFL bulbs (most in ceiling fans), and had no losses for the several years that we owned the house after that. But I remember paying way more for bulbs in years before that and having them all fail fairly quickly.
Just switching to a basic qwerty layout for gaming would simplify that quite a lot
This … I’ve been a Dvorak typist for 15+ years. I have a querty layer for gaming, and a second Dvorak layer for when I switch from Windows to MAC so that I can use my same single key chords (cut / copy / paste / undo / redo / etc).
Xcode seems to get worse with each release.
The really basic things that it’s missing are frustrating too, like bookmarks. This has been a feature of every other IDE I’ve used since '98 when I started programing in VB6.
A few versions ago they removed the ability to tear a tab out of the IDE to have it open separately.
Any QMK based board that supports VIA should work, since the macros and key bindings are stored on the board, and you can use a browser to configure it (even if you have to configure it on another machine, and swap back to the Steam Deck).
Alternatively, I believe that Solaar is available in Discover Store for Steam Deck, and that would allow you to configure Logi devices (but I don’t have any personal experience with this yet).