Same. Just don’t become too good at it. Now I have to write whitepapers and participate in speaker panels at conferences. Ugh.

It will no longer receive updates.

Another poster shared the blog post: https://divestos.org/pages/news#end.

Dev is no longer maintaining along with DivestOS.

1. Not sure on this one.

2. The auditor is to make sure you are installing an authentic version of graphene. That it is not a modified version that has been tampered with (e.g., backdoors).

3. Automatically enables MAC randomization. This can help with being tracked on public networks. Fingerprinting techniques have gotten better though with deep packet inspection and even measuring radio characteristics. I’ve seen demos of two brand new and identical models of iPhones being distinctly picked out due to variances in the radios during manufacturing.

Doesn’t help with advertisers tracking behavior based on IP. VPNs help with “blending-in” by putting multiple users behind the same IP. Provider matters here. Needs to be a VPN provider that won’t just sell your data or cave to law enforcement. Mullvad is my preference. Paid with crypto. RAM only logs. That said, use Tor or I2P for anything you don’t want subpoenaed.

For additional tips:

• Can’t remember if its on by default, but auto-reboot to put data at rest (encrypted and not in RAM). This is for a state-actor threat level, and less about advertisers.
• I prefer pin codes to unlock my device and don’t use biometrics. Graphene has a feature to randomize the pin pad every time to protect against a recording of the pin be entered. Specifically where the numbers aren’t picked up on the video but the pattern your hand makes can be seen. Again, more of a state-actor threat level.

Good call on a simulated failure. When I first set it up, it was LVM/BTRFS or ZFS as my top choices. It was a coin toss at the time because I hadn’t built this sort of setup before.

I use immutable nixos installs. Everything to redeploy my OS is tracked in git including most app configurations. The one exception are some GUI apps I’d have to do manually on reinstall.

I have a persistence volume for things like:

• Rollbacks
• Personal files
• Git repos
• Logs
• Caches / Games

I have 30 days (or last 5 minimum) of system rollbacks using BTRFS volumes.

The personal files are backed up hourly to a local server which then backs up nightly to B2 Backblaze using rclone in an encrypted volume using my private keys. The local server has a mishmash of drives in a mirrored LVM setup. While it works well for having mixed drives, I’ll warn I haven’t had a drive failure yet so I’m not sure the difficulty of replacing a drive.

My phone uses the same flow with RoundSync (rclone + GUI).

Git repos are backed up in git.

Logs aren’t backed up. I just persist them for debugging and don’t want them lost after every reboot.

Caches/Games are persisted but not backed up. Nixos uses symlinks and BTRFS to be immutable. That paradigm doesn’t work well for this case. The one exception is a couple game folders are part of my personal files. WoW plugin folder, EvE online layouts, etc.

I used to use Dropbox (with rclone to encrypt). It was $20/mo for 2Tb. It is cheaper on paper. I don’t backup nearly that much. Backblaze started at $1/mo for what I use. I’m now up to $2/mo. It will be a few years before I need to clean up my backups for cost reasons.

The local server is a PC in a case with 8 drive bays plus some NVME drives for fast storage. It has a couple older drives and for the last couple years I typically buy a pair of drives on sale (black Friday, prime day, etc). I have a little over 30TB mirrored, so slightly over 60TB in total. NVME is not counted in that. One NVME is for the system, the others are a caching layer (monero node) or temp storage (transcoding as it also my media server).

I like the case, but if I were to do it again, I’d probably get a rack mountable case.

For the networking I found some repos with Nix and Gluetun (OCI containers). I don’t see them in my bookmarks, so it was probably a day project when I set up and didn’t keep the references.

That part is still in docker / podman. So any docker network guide just needs to be translated to nix.

Best resource I’ve found is searching GitHub.

My setup closely follows https://github.com/Misterio77/nix-config.

For servarr I just translated someone else’s docker compose setup to nix. There are some ready made nix ones you can look at like https://github.com/rasmus-kirk/nixarr/tree/main/nixarr.

The complex networking I just picked up over time once I knew my way around a little bit.

GitHub is your best resource. lang:nix search terms.

I wouldn’t run NixOS in a container. With native nix containers I’m pretty sure they share the store. For docker I’d use images built with nix (doesn’t run nix itself) or pull from docker hub.

OS: NixOS (high learning curve but its been worth it). Nix (the config language) is a functional programming language, so it can be difficult to grok. Documentation is shit as its evolved while maintaining backwards compatibility. If you use the new stuff (Nix Flakes) you have to figure what’s old and likely not applicable (channels or w/e).

BYOD: Just using LVM. All volumes are mirrored across several drives of different sizes. Some HDD volumes have an SSD cache layer on top (e.g., monero node). Some are just on an SSD (e.g., main system). No drive failures yet so can’t speak to how complex restoring is. All managed through NixOS with https://github.com/nix-community/disko.

I run stuff on a mix of OCI containers (podman or docker, default is podman which is what I use) and native NixOS containers which use systemd-nspawn.

The OS itself I don’t back up outside of mirroring. I run an immutable OS (every reboot is like a fresh install). I can redeploy from git so no need to backup. I have some persistent BTRFS volumes mounted where logs, caches, and state go. Don’t backup, but I swap the volume every boot and keep the last 30 days of volumes or a min of at least 10 for debugging.

I just use rclone for backups with some bash scripts. Devices back up to home lab which backs up to cloud (encrypted with my keys) all using rclone (RoundSync for phone).

Runs Arrs, Jellyfin, Monero node, Tor entry node, wireguard VPN (to get into network from remote), I2C, Mullvad VPN (default), Proton VPN (torrents with port forwarding use this), DNS (forced over VPN using DoT), PiHole in front of that, three of my WiFi vlans route through either Mulvad, I2C, or Tor. I’ll use TailsOS for anything sensitive. WiFi is just to get to I2C or Onion sites where I’m not worried about my device possibly leaking identity.

Its pretty low level. Everything is configured in NixOS. No GUIs. If its not configured in nix its wiped next reboot since the OS is immutable. All tracked in git including secrets using SOPS. Every device has its own master key setup on first install. I have a personal master key should I need to reinstall which is tracked outside of git in a password manager.

Took a solid month to get the initial setup done while learning NixOS. I had a very specific setup of LVM > LUKS encryption /w Secure Boot and Hardware Key > BTRFS. Overkill on security but I geek out on that stuff. Been stable but still tinkering with it a year later.

I’ve been screaming its just wage theft. My city provides tax breaks for occupancy (employees prop up the local economy buying lunch). They are making me pay for gas, time, and car maintenance (and lunch but fuck them, I’ll just not eat) for this tax break which goes to C-level bonuses/shareholders. Its just another way of skimming off the top of employee wages.

We worked fully remote for nearly 2 years and the hybrid policy just keeps getting worse and worse. Coupled with quarterly riffs, I also suspect this is to avoid severance pay/unemployment while accelerating the down sizing. Yet our CEO bonus keeps going up and up despite our stock plummeting since the end of COVID lock downs.

The DNS is cheap. Something like a penny a day for privacy. I typically paid like $50 every 2-3 years for both renewal and DNS on a couple domains.

Was kind of a PITA to be honest as I remember their login process was a little weird. I eventually moved on when they were slow to adopt some of the newer TLDs.

The registrar owns the domain then, not you. I made a root comment about Njalla which offers this service.

edit: Well you could use fake data. Still risk losing claim to it. I tried doing this with name cheap and they figured it out somehow that the info I gave wasn’t real. Was years ago so I don’t remember what I put in. My guess is it was one of those soft credit lookups (where did you live between X and Y?). Could also be misremembering.

One of the pirate bay founders created https://njal.la/#home but with the caveat:

For instance, when you register a domain name in our system, we can register with our own data. We will be the actual registrant of the domain – it’s not an ownership by proxy as found with all other providers. However, you will still have the full control over the domain name. You can either use our information (and our nameservers) or you can go with your custom data. And you can move at any time. Simple, flexible.

I believe it is required (ICANN?) to have a real entity attached to every domain, even with a proxy for the public whois. They simply offer to be that identity to avoid giving any identifying information, but they will have all claim on it if it came to a legal dispute.

I’ve been getting weird walking instructions. Like 6 min walk is +30 to avoid some invisible barrier.

I have a few of those. During the reddit exodus when the API changes went live, I had to register on a few servers to finally get a working and stable account. Issues with email or setting up captchas to prevent bots resulted in a few of my accounts not going live until a week+ later on some instances.

https://feddit.org/post/3143093

1. Multi-community simulator
2. Defederation avoidance, usually paired with accounts on special interest servers you don’t want to risk losing access to.
3. Porn and non-porn.
4. Privacy by dividing online activities between multiple accounts to make it difficult to profile you and to maintain some pseudonymity.

Something like vim-table-mode work as an improvement? You got me there though, tables can be a real pain in a terminal.

For the second, I setup an on save hook or watch script to build a PDF and open it. Its been a minute, but I think I had to find a PDF viewer that would refresh if already open and keep the current position on subsequent opens.

Best of luck finding something that works for you!

Need more info.

The answer will still and always be, just use nvim.

What features do these dedicated tools have that make you want to use something other than nvim?